Have you ever faced a situation where you have been using a Wi-Fi network for many months and suddenly realized that you don’t remember its password?
Our systems remember every Wi-Fi password we’ve ever connected to.
That’s how it re-establishes connections with those networks without entering the password again.
Here’s a tutorial on how you can explore the saved password of any network you’ve ever connected to on your Windows, Linux, and macOS.
Let’s get started.
In Windows, you can easily find the Wi-Fi passwords by using the command prompt.
For opening the command prompt, you can go to the search bar and then search for CMD. Don’t forget to run it as an administrator.
Once the command prompt is open, Just run the following command.
netsh wlan show profiles
This command will display all the Wi-Fi network interfaces you’ve ever connected to previously. For example, you can see below these are the Wi-Fi networks I’ve ever connected to.
C:Usersgeekflare>netsh wlan show profiles Profiles on interface Wi-Fi: Group policy profiles (read only) --------------------------------- User profiles ------------- All User Profile : OPPO A31 All User Profile : Jio 2g All User Profile : Redmi All User Profile : AndroidAP8840 All User Profile : belkin.637 All User Profile : Android GalaxyM-20 All User Profile : Free-wifi! All User Profile : OnePlus 7 All User Profile : Micromax All User Profile : sunsytesms_Wifi All User Profile : GPONWIFI_C060
And next step is to explore the password of a particular interface. Just use the below command.
netsh wlan show profiles key=clear
Here you should provide the interface name for the password to be revealed.
C:Usersgeekflare>netsh wlan show profiles Micromax key=clear Profile Micromax on interface Wi-Fi: ======================================================================= Applied: All User Profile Profile information ------------------- Version : 1 Type : Wireless LAN Name : Micromax Control options : Connection mode : Connect manually Network broadcast : Connect only if this network is broadcasting AutoSwitch : Do not switch to other networks MAC Randomization : Disabled Connectivity settings --------------------- Number of SSIDs : 1 SSID name : "Micromax" Network type : Infrastructure Radio type : [ Any Radio Type ] Vendor extension : Not present Security settings ----------------- Authentication : WPA2-Personal Cipher : CCMP Authentication : WPA2-Personal Cipher : GCMP Security key : Present Key Content : 00000CD53 Cost settings ------------- Cost : Unrestricted Congested : No Approaching Data Limit : No Over Data Limit : No Roaming : No Cost Source : Default
In the security settings details, you can see the password (Key Content) for the interface I provided.
This is how you can easily find a Wi-Fi password for any interface using the command prompt in windows.
In all Linux distributions, information of all wireless networks is being stored in the Network manager directory.
To find the saved Wi-Fi passwords using a command line, enter these commands.
After that, use the list command to show the files in the folder.
Network config files will be displayed on the screen after using the command. These config files contain information about each network, including the Wi-Fi SSID, UUID, and Wi-Fi password. Use Cat command or some text editor to open the file and see the password for a specific interface.
This command will show all the information about the Wi-Fi network you have chosen.
┌──(root💀kali)-[/home/writer] └─# cd /etc/NetworkManager/system-connections ┌──(root💀kali)-[/home/writer/etc/NetworkManager/system-connections] └─# ls -a GPONWIFI_CO60 Jio2g ┌──(root💀kali)-[/home/writer/etc/NetworkManager/system-connections] └─# sudo cat GPONWIFI_CO60 [connection] id=GPONWIFI_C060 uudi=7cb198f4-5e6d-4277-8c13-29e24f04b07e type=802-11-wireless [802-11-wireless] ssid=GPONWIFI_CO60 mode=infrastructure mac-address=xx:xx:xx:xx:xx:xx security=802-11-wireless-security [802-11-wireless-security] key-mgmt=wpa-psk auth-alg=open psk=00000Dwwqf2 [ipv4] method=auto [ipv6] method=auto
In the above output, the PSK (pre-shared key) value is the password for the given Wi-Fi network.
In the macOS also, you can easily find the password for any Wi-Fi interface using the command line. You can launch the terminal by navigating to Applications > Utilities > Terminal.
security find-generic-password -ga Interface-name| grep “password:”
Here, you need to replace the interface name with the Wi-Fi network name you choose. This command reveals the password for the Wi-Fi network you provide.
If you’ve ever joined a Wi-Fi network, you have that network’s password saved on your system. It doesn’t matter whichever operating system it is. You can use the terminal to access all your saved Wi-Fi passwords.
I hope you found this article very useful in finding the Wi-Fi passwords in different operating systems.
You may also be interested in knowing about the various best Wi-Fi routers for personal and office use.