This tutorial is going to show you how to install LEMP stack on RHEL 8 and CentOS 8.
What’s LEMP Stack?
A software stack is a set of software tools bundled together. LEMP stands for Linux, Nginx (pronounced engine X), MariaDB/MySQL and PHP, all of which are open source. It is the most common software stack that powers dynamic websites and web applications. Linux is the operating system; Nginx is the web server; MariaDB/MySQL is the database server and PHP is the server-side scripting language responsible for generating dynamic web pages.
Prerequisites
You can download and install RHEL 8 by following the tutorial below.
If you are looking for a VPS (Virtual Private Server), then you can register an account at Vultr via my referral link to get $50 free credit for use over 30 days.
This tutorial uses root account to manage administration tasks. To switch to root, run the following command and enter root password.
su -
Step 1: Install Nginx Web Server on RHEL 8/CentOS 8
Nginx is a high performance web server and very popular these days. It also can be used as a reverse proxy and caching server. Enter this command to install Nginx Web server.
yum install nginx -y
After it’s installed, we can start Nginx with this command:
systemctl start nginx
Enable Nginx to auto start at system boot time by running the following command.
systemctl enable nginx
Now check its status.
systemctl status nginx
Output:
● nginx.service - The nginx HTTP and reverse proxy server Loaded: loaded (/usr/lib/systemd/system/nginx.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2018-12-05 02:04:00 EST; 7s ago Main PID: 5032 (nginx) Tasks: 2 (limit: 11512) Memory: 8.4M CGroup: /system.slice/nginx.service ├─5032 nginx: master process /usr/sbin/nginx └─5034 nginx: worker process
“Enabled” indicates that auto start at boot time is enabled and we can see that Nginx is running. Notice that the above command will not immediately quit after running. You need to press “q” to make it quit.
Check Nginx version.
nginx -v
Output:
nginx version: nginx/1.14.1
If you are installing LEMP on your local RHEL 8/CentOS 8 computer, then type 127.0.0.1 or localhost in the browser address bar. You should see the “Welcome to Nginx” Web page, which means Nginx Web server is running properly.
By default, RHEL 8/CentOS 8 forbids public access to port 80. To allow other computers to access the web page, we need to open port 80 in firewalld, the dynamic firewall manager on RHEL/CentOS. Run the following command to open port 80.
firewall-cmd --permanent --zone=public --add-service=http
If you want to enable HTTPS on Nginx later, then you also need to open port 443.
firewall-cmd --permanent --zone=public --add-service=https
The --permanent option will make this firewall rule persistent across system reboots. Next, reload the firewall daemon for the change to take effect.
systemctl reload firewalld
Now the Nginx web page is accessible publicly.
Finally, we need to make user nginx as the owner of web directory. By default it’s owned by the root user.
chown nginx:nginx /usr/share/nginx/html -R
Step 2: Install MariaDB Database Server on RHEL 8/CentOS 8
MariaDB is a drop-in replacement for MySQL. It is developed by former members of MySQL team who are concerned that Oracle might turn MySQL into a closed-source product. Enter the following command to install MariaDB on RHEL 8/CentOS 8.
yum install mariadb-server mariadb -y
After it’s installed, we need to start it.
systemctl start mariadb
Enable auto start at system boot time.
systemctl enable mariadb
Check status:
systemctl status mariadb
output:
● mariadb.service - MariaDB 10.3 database server Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disable> Active: active (running) since Wed 2018-12-05 02:40:44 EST; 8s ago Docs: man:mysqld(8) https://mariadb.com/kb/en/library/systemd/ Main PID: 17582 (mysqld) Status: "Taking your SQL requests now..." Tasks: 30 (limit: 11512) Memory: 75.2M CGroup: /system.slice/mariadb.service └─17582 /usr/libexec/mysqld --basedir=/usr
“Enabled” indicates that auto start at boot time is enabled and we can see that MariaDB server is running. Now we need to run the security script.
mysql_secure_installation
When it asks you to enter MariaDB root password, press Enter key as the root password isn’t set yet. Then enter y to set the root password for MariaDB server.
Next, you can press Enter to answer all remaining questions, which will remove anonymous user, disable remote root login and remove test database. This step is a basic requirement for MariaDB database security. (Note that the letter Y is capitalized, which means it’s the default answer.)
Now you can run the following command and enter MariaDB root password to log into MariaDB shell.
mysql -u root -p
To exit, run
exit;
Step 3: Install PHP-FPM on RHEL 8/CentOS 8
Install PHP and related modules using the following command:
yum install php php-mysqlnd php-fpm php-opcache php-gd php-xml php-mbstring -y
After it’s installed, we need to start it.
systemctl start php-fpm
Enable auto start at system boot time.
systemctl enable php-fpm
Check status:
systemctl status php-fpm
output:
● php-fpm.service - The PHP FastCGI Process Manager Loaded: loaded (/usr/lib/systemd/system/php-fpm.service; enabled; vendor preset: disable> Active: active (running) since Wed 2018-12-05 03:06:01 EST; 22s ago Main PID: 18631 (php-fpm) Status: "Processes active: 0, idle: 5, Requests: 0, slow: 0, Traffic: 0req/sec" Tasks: 6 (limit: 11512) Memory: 29.6M CGroup: /system.slice/php-fpm.service ├─18631 php-fpm: master process (/etc/php-fpm.conf) ├─18632 php-fpm: pool www
“Enabled” indicates that auto start at boot time is enabled and we can see that PHP-FPM is running. Now edit the PHP-FPM config file:
nano /etc/php-fpm.d/www.conf
By default, PHP-FPM runs as the apache user. Since we are using Nginx web server, we need to change it. Find the following two lines.
user = apache group = apache
Change them to
user = nginx group = nginx
In this file you can find the following line.
listen = /run/php-fpm/www.sock
This indicates that PHP-FPM is listening on a Unix socket instead of a TCP/IP socket, which is good. Save and close the file. Reload PHP-FPM for the changes to take effect.
systemctl reload php-fpm
Step 4: Test PHP
By default, the Nginx package on RHEL 8/CentOS 8 includes configurations for PHP-FPM (/etc/nginx/conf.d/php-fpm.conf and /etc/nginx/default.d/php.conf). To test PHP-FPM with Nginx Web server, we need to create a info.php file in the document root directory.
nano /usr/share/nginx/html/info.php
Paste the following PHP code into the file.
Save and close the file. If you installed LEMP stack on a local RHEL 8/CentOS 8 server, type in 127.0.0.1/info.php or localhost/info.php in the browser address bar. You should see your server’s PHP information. This means PHP scripts can run properly with Nginx web server.
If RHEL 8/CentOS is running on a remote server, then enter server-ip-address/info.php in browser address bar. Replace sever-ip-address with your actual IP address.
If the browser fails to display the PHP info but prompt you to download the info.php file, simply restart Nginx and PHP-FPM.
sudo systemctl restart nginx php-fpm
Then you should be able to see the PHP info in the web browser.
Congrats! You have successfully installed Nginx, MariaDB and PHP7.2 on Red Hat 8 or CentOS 8. For your server’s security, you should delete info.php file now to prevent hacker seeing it.
rm /usr/share/nginx/html/info.php
I hope this tutorial helped you. As always, if you found this post useful, then subscribe to our free newsletter to get more tips and tricks. Take care 🙂
Rate this tutorial
[Total: 3 Average: 4.3]
